Archives

Homemade Solar Cells – Using Diy Plans To Build Your First Residential Solar Panel

Homemade Solar Cells – Using Diy Plans To Build Your First Residential Solar Panel

You are able to build your own residential solar panels if you have the knowledge to. Instead of paying several thousand dollars to buy commercial panels, you are able to setup a complete solar power generator with a fraction of this cost. The best part about this is you are able to use simple tools to build the entire installation at your backyard or garage.

Yet what’s the result of all these work? You will be able to save thousands on energy bills every year. You will no longer needcommercial panels or professional installers. Thus you can also save on your photovoltaic panel setup. Most of all, you will be saving the environment, making our Earth a better place for you and your children to live in. Many folks today follow proven DIY construction plans to make their own solar power system. You can take this approach as well if you want to build solar panel systems on the cheap.

These blueprints are easily available on the Internet and are relatively affordable. Most of them are packaged as DIY solar instructional manuals that also teach you how to build your own solar energy panels. By following the instructions within, even an inexperienced homeowner can make his first solar power generator. Using only 200 dollars, you can make homemade solar panels and start reaping the benefits of harnessing solar energy. This is how cheap each photovoltaic panel can be when you use proven construction plans. There are also free plans that you can download from the Internet. Certainly, they do not include every single detail you need.

Yet it’s good to start from there to build up your knowledge base. For less than 50 dollars, you can get a good instructional guide that gives you all the insider tips and industry secrets that were not previously revealed to folks like you and me. This is really cheap, isn’t it? Inside, you can also find tips on where to get quality yet dirt-cheap materials to build your solar energy panels. This alone can save you lots of money. With DIY solar power, you can start small and scale up your project when you have the finances and time to. You can supply energy to low power appliances like garage lights and televisions first. In due time, you may have an off-grid system that can supply your entire home with renewable energy. When you generate surplus energy, your local power company may also pay you for it – this is money that you can spend on better things than energy bills.

Share

Solar Panel Home Energy Systems – Using Solar Panel Energy Systems For Your Home

Solar Panel Home Energy Systems – Using Solar Panel Energy Systems For Your Home

It can certainly be very beneficial if you are going to have your own solar panel home energy systems. This way, you will be able to produce your own electricity and you no longer have to solely depend on the commercial electric service providers. And consequently, you can also expect that your monthly bills will be reduced and this is certainly a good thing. Furthermore, there are also several state governments that offer various tax incentives to households that use this equipment.

But you should also know that this can also be very beneficial for the environment. With these solar panel home energy systems, you will only rely on the power of the sun. And consequently, you will no longer have to abuse any of your natural resources and this can certainly be very helpful in preserving what we have.

But despite these advantages, there are still a lot of people who are hesitant to have these solar panel home energy systems. Probably, they do not know the kinds of materials that they should use. There are also those who are clueless about the procedures that they will have to go through. However, if you are going to learn more about this project, you will know that this is very simple.

One of the things that you should do is to understand the concept behind this project. This has something to do with the conversion of the power of the sun into usable power. The power is stored in batteries which are found inside the equipment.

You should also not worry about the material that you need because they can be found in several retail and hardware stores. As a matter of fact, you can also have an option to purchase online. They are also not as expensive as some people may have thought. But the most important thing is that you are assured that they have good quality.

It is also very essential that you will install the equipment properly. As much as possible, you should make sure that you will install it in an open area and in a place where it is safe from large animals.

But if you really do not know how to use these solar panel home energy systems, then it is a good idea if you will get a guide. These guides can walk you through the entire process until the task is fully accomplished.

It can certainly be very beneficial if you will have this equipment but you also need to make sure that you will do this task right.

Tired of high electric bills? Discover how thousands of families are using homemade wind power systems to power their homes

Learn how to make your own Solar Power

Share

Using Climate Change To Your Advantage

Rather than worry about climate change and the affects it could have on mankind in general and yourself in particular, how about using it to your advantage? The summer of 2009/2010 in Perth was the second hottest on record. It seems that many areas in Australia are getting hotter weather now than they did years ago, even though other countries are suffering through much colder winters than they’ve experienced for years.

If Australia’s weather is destined to be hot or hotter, you can take advantage of that by installing solar power not only for your hot water needs, but for other uses as well. You can even cook and run an air conditioner using solar power. Hot summer weather will only make solar power more efficient.

It could be that you will have more solar power than you can actually use, so you can then sell it back to the electricity commission in your area – if they have such a plan in place – and make money instead of having to spend it all the time. That is certainly using climate change to your advantage.

If you are a new home builder, the extra warmth of climate change can be used to your advantage by the way you site your home. This cannot always be done due to limitations of the block, but if you can situate your home so that the living area faces north – if you live south of the equator – then you will get lots of winter sun into your room to warm it.

In summer, the sun is higher in the sky, so it will not shine into these rooms and make them too hot. If the slope of your roof faces the north, then that is the ideal place to site solar panels as they will get the full force of the sun.

Share

Understanding & Using Solar DC-AC Inverters ? Part 1

DC-AC inverters are electronic devices used to produce .mains voltage. AC power from low voltage DC energy (from a battery or solar panel). This makes them very suitable for when you need to use AC power tools or appliances but the usual AC mains power is not available. Examples include operating appliances in caravans and mobile homes, and also running audio, video and computing equipment in remote areas.

Most inverters do their job by performing two main functions: first they convert the incoming DC into AC, and then they step up the resulting AC to mains voltage level using a transformer. And the goal of the designer is to have the inverter perform these functions as efficiently as possible . so that as much as possible of the energy drawn from the battery or solar panel is converted into main voltage AC, and as little as possible is wasted as heat.

Modern inverters use a basic circuit scheme like that shown in Fig.1. As you can see the DC from the battery is converted into AC very simply, by using a pair of power MOSFETs (Q1 and Q2) acting as very efficient electronic switches. The positive 13.8V DC from the battery is connected to the centre-tap of the transformer primary, while each MOSFET is connected between one end of the primary and earth (battery negative). So by switching on Q1, the battery current can be made to flow through the .top. half of the primary and to earth via Q1.

Conversely by switching on Q2 instead, the current is made to flow the opposite way through the .lower. half of the primary and to earth.

Therefore by switching the two MOSFETs on alternately, the current is made to flow first in one half of the primary and then in the other, producing an alternating magnetic flux in the transformer.s core. As a result a corresponding AC voltage is induced in the transformer.s secondary winding, and as the secondary has about 24 times the number of turns in the primary, the induced AC voltage is much higher: around 650V peak to peak.

By the way if you.re wondering why MOSFETs are used as the electronic switches, to convert the DC into AC, it.s because they make the most efficient high-current switches. When they.re .off. they are are virtually an open circuit, yet when they.re .on. they are very close to a short circuit (only a few milliohms). So very little power is wasted as heat.

(In DC-AC inverters designed to deliver high power, there are actually quite a few MOSFETs connected to each side of the transformer primary, to share the heavy current. However because they.re essentially connected in parallel, you can still think of them as behaving very much like the single transistors shown in Fig.1.

They just behave like very high-power MOSFETs, able to switch many tens of amps…)

Note that because the switching MOSFETs are simply being turned on and off, this type of inverter does not produce AC of the same .pure sinewave. type as the AC power mains. The output waveform is essentially alternating rectangular pulses, as you can see from Fig.2. However the width of the pulses and the spacing between them is chosen so that the ratio between the RMS value of the output waveform and its peak-to-peak value is actually quite similar to that of a pure sinewave. The resulting waveform is usually called a .modified sinewave., and as the RMS voltage is close to 230V many AC tools and appliances are able to operate from such a waveform without problems.

It.s true, though, that this kind of waveform is not close enough to a sinewave for some appliances. That.s mainly because the rectangular pulses contain not just the fundamental mains frequency, but quite a lot of its harmonics as well.

So if the inverter is operating at the Australia/New Zealand mains frequency of 50Hz, the output will also contain components at 100Hz, 150Hz, 200Hz, 250Hz and so on.

These harmonics can disturb the operation of some appliances. It.s because of this shortcoming that manufacturers have come up with a more complex type of inverter, which does deliver a pure sinewave output. More about these later.

Share

Using The Australian Sun To Power Your Home

Using The Australian Sun To Power Your Home

Many homeowners in Australia take advantage of the sun for heating their homes without even thinking about it. When you pull back those curtains on a cool morning to let the warm sunlight in, you are actually using the sun the warm your home as well as for lighting.

Of course, the sun can be used to power your home more effectively when you install photovoltaic or PV panels. When the sun’s rays hit these panels they are absorbed by certain materials that are semi-conductors such as silicone. This separates the electrons from the atoms so that they can flow through this material and electricity is produced. Converting light to electricity is known as the photovoltaic effect.

Solar panels convert light to direct current (DC) electricity. This must then be converted to alternating current (AC) before it can be used to run household appliances. This is done by passing it through an inverter before it enters the home’s utility panel for further distribution to lights and appliances.

Solar power is also stored as DC electricity in batteries to supply the home with power during the night or if there is a blackout during the day. Or maybe for when you get a spell of wet or cloudy weather that reduces the amount of solar power available for conversion.

If more electricity is produced than can be used or stored, then this can be transferred to the power grid with a utility meter to keep track of the amount of electricity that goes in or out of the house. The inflow and outflow of electricity are offset so that you only pay for the amount of electricity that is used. In some cases you would not pay anything because what is used from the grid is paid for by what is put back from your PV panels.

Share

Get Started on Using Solar Energy

If you wish to make a contribution to saving the environment and at the same time, would not mind seeing your electricity bills diminish dramatically, there is no better time to take advantage of using solar electricity than now. More people have had photovoltaic (PV) panels installed in their homes and have been seeing the benefits of lower costs of ownership through the introduction of renewable energy certificates and other rebates. Businesses are also being encouraged to introduce energy efficiencymeasures and incentives exist for the introduction of targeted initiatives.

There is of course, no better place to get started than in your own home. If you would like to know the basics of having PV panels installed, here is a round-up of what you need, what to expect, and how to go about your plan. But there is one important attribute that you must possess to be able to make the option work: the passion to make a change and generate electricity from renewable sources. Whatever, your motivation, action is important.

Solar Panels

First of all, you would need an entire solar panel system that usually includes the PV panels, wiring, an inverter, and brackets. The number of solar system manufacturers continues to increase and with the growing amount of competition, prices have become more competitive making installation of a solar power system more affordable.

The inverter is responsible for converting direct current energy absorbed by the solar panels from the sun’s rays into alternating current to feed your electrical system. An inverter meter would indicate the amount of renewable energy you are generating on a daily basis.

A Sunny Location

Although a lot of people living or operating their businesses in locations that do not see sunlight for most of the year have been using solar electricity, installing a solar power system in an extremely sunny area has its advantages. It is recommended that you set up the PV panelsfacing the north for them to get maximum exposure. There should be no structures or trees blocking the sunlight. The rooftop is the most common location for installing the solar panels.

Batteries

For off grid premises, battery arrays are often required to store any excess solar electricitygenerated by the system. If you are connected to the grid, you will receive the benefits of feed in tariffswhereby your power company will pay you for the electricity you generate. The process is called gross and net metering. Governments in Australia encourage the use of solar power by offering incentives in the form of solar rebates and/or renewable energy certificates, which are obtained by homes and businesses using renewable energy sources.

How much do I need to spend?

The amount you need to invest for a solar power system would depend on your energy requirement. In Australia, it is possible to get a smaller system for as little as $4,000.

Share

How Is Electricity Produced Using Solar Panels Home Energy System?

Much research is being done into the ideals of solar energy and how it can optimize daily living on our planet. Plants have the ability to covert solar light energy from the sun into fuel. This is something we humans have not yet discovered the intricacies of, yet we have discovered how it is possible to covert solar energy into electricity. “The question if often asked, “How is electricity produced using solar panels?”

The sun provides a wealth of energy and is actually capable of supplying enough power to run the whole worlds infrastructure. However we have not learned how to wield the energy of the sun in such a manner as of yet.

We have developed a method of creating solar power through things that we call solar cells. Solar cells are made of little silicone crystals which are able to store the photonic energy emitted by the sun. This photonic energy can be converted into electric current and this is done via solar panels.

Solar boards are built in factories and consist of a number of solar cells. Solar cells can hold varying capacities of energy depending on the type of crystals used. The cells used for major distribution of energy like on that of a satellite would have a larger capacity compared to that of a solar panel used to power a home.

Solar panels are generally fixed onto a weather protective board in a place that receives the most sunlight energy of the day. Small amount of solar energy are collected inside the solar cells as provided by the sun’s rays. When many solar panels are connected, they are capable of producing a decent amount of electrical power. Electric current generated from the panels can be transferred to house hold main power supply and thus give power to various electrical appliances within the home.

It is possible to recharge and store energy produced during the day through the use of a charge controller and battery system, by which one is now able to have power at night when the sun is not out to produce energy.

Our earth is extremely reliant on resources and fuels. Solar energy proves there is hope for a greener future. I have personally managed to build my own home DIY renewable energy system by following an online system which you can find out more about at my website link below.

Share

Benefits of Using Solar Panels at Home

Nowadays, more and more people are starting to utilize solar energy for their homes. They have solar panels installed on their roofs and they use it to supply a percentage of their household energy consumption. Solar panels provide a renewable and sustainable energy source which makes it a very good alternative to pollution-generating electricity generators.

So what exactly are solar panels? Solar panels are devices which absorbs solar energy from the sun. This energy is then converted to any form for household usage. Energy from these panels could be stored in a battery and be used in various household gadgets and appliances. Solar panels are noise free and do not cause pollution – therefore it does not cause harm to the environment. Another good thing about solar panels is that it requires very little maintenance. The only expensive part I guess would be the initial set up of the device. Having solar panels installed in your homes would save you money and electricity bills in the long run. This is why solar panels should be adapted by people all over the world to help conserve energy and save Mother Earth from global warming.

We should all take part in saving Mother Earth by looking for renewable sources of energy – and solar panels are a perfect fit for this. It will definitely be difficult for us to live when all the non-renewable resources get depleted. So as early as now, we should start using alternative sources to avoid that from happening. Save energy, save Mother Earth.

Share